Vido Mini One BZ USB Drivers

Vido Mini One BZ phone not showing up on the PC? Or Vido Mini One BZ phone won’t connect to a computer? It might be because of the missing Vido Mini One BZ USB drivers or corrupted drivers. To fix the problem, download the Vido Mini One BZ USB driver and install it on your computer.

Vido USB drivers are required to connect Vido Mini One BZ to a Computer or Laptop via USB cable. If you’re looking for a Vido Mini One BZ USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then we have got you covered. We have shared the official USB Driver for Vido Mini One BZ along with the ADB interface drivers and Fastboot drivers on this page.

With Vido Mini One BZ Android USB Driver installed, we can connect the device to the computer as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files between the two devices.

Vido Mini One BZ ADB Driver and Fastboot Driver enable you to pass ADB commands and Fastboot commands from the computer to perform certain operations on your phone.

Download Vido Mini One BZ USB Driver

The Vido mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.

Vido Mini One BZ Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Vido Mini One BZ USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Vido Mini One BZ Fastboot and ADB drivers can be downloaded below.

Vido Mini One BZ ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Vido N101RK USB Drivers

How to Install Vido Mini One BZ Rockchip USB Drivers

1. Download and extract the Rockchip USB Driver package to Desktop on your computer.
2. Run Rockchip Driver Assistant (DriverInstall.exe) as administrator on your computer from the extracted folder.
3. Now, the RK Driver Assistant window should open.
4. Click on the Install Driver button to proceed with the installation process.
5. If Windows Security window asking, "Would you like to install this device software?" pop-up. Click on Install to continue.
6. When the RK Drivers are installed, you'll see the "Install driver ok" message.
7. Click on OK to exit the setup window and reboot your computer.

How to Install Vido Mini One BZ USB Drivers Manually

1. Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.
2. Open the Device Manager on your computer by searching device manager from Windows Start Menu.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then select Add legacy hardware.
5. Add Hardware Wizard window should open, click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. On the next screen, click on Have Disk… to open the Install From Disk window.
9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf file and click on Open and then on OK.
11. Select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, restart your computer.

Video Tutorial: How to Install Vido Mini One BZ Android USB Drivers

How to Install Vido Mini One BZ ADB and Fastboot Drivers

1. Download and extract 15 seconds ADB installer on your computer.
2. Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.
3. Now a command prompt window with a blue background and white text should open.
4. It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
6. Now, the ADB driver and Fastboot driver installation process should begin.
7. When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.
8. Now the "Device Driver Installation Wizard" window should open.
9. Click on Next to continue installing the Google USB Drivers (WinUSB).
10. Once installed, click on Finish and reboot your computer.

Video Tutorial: How to Install Vido Mini One BZ ADB and Fastboot Drivers