Computer not recognizing USB when Motorola Moto Z 2018 is connected to PC using a USB cable? Motorola Moto Z 2018 phone not showing up on PC? It might be a driver problem, or your computer might be missing the required Motorola Moto Z 2018 USB Drivers. To fix the issue, download Motorola Moto Z 2018 USB Driver and install them on your computer.
Most computers don’t have proper Google Android USB Drivers installed, so it is essential to download Motorola USB Drivers and install them on your computer to properly connect Motorola Moto Z 2018 to a Computer or Laptop using a USB cable. Here on this page, we have shared the official Motorola Moto Z 2018 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8.
Apart from the official USB Driver for Motorola Moto Z 2018, we have also shared ADB interface drivers and Fastboot drivers for Motorola Moto Z 2018.
The Motorola Moto Z 2018 Android USB Driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to a computer and laptop so that you can transfer images, videos, documents, and other files to and from phone to computer.
The Motorola Moto Z 2018 ADB driver and Fastboot driver allows you to pass ADB commands and fastboot commands to perform specific operations on your phone right from your computer.
Download Motorola Moto Z 2018 USB Driver
The Motorola Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It can also be used for general purposes like transferring data, media, documents, and other files from phone to computer and vice versa.
Motorola Moto Z 2018 Driver for Flashing Firmware
How to install: Follow Tutorial
How to install: Follow Tutorial
Download Motorola Device Manager Latest Version
Motorola Moto Z 2018 USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Motorola Moto Z 2018 Fastboot and ADB drivers can be downloaded below.
Motorola Moto Z 2018 ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Motorola Moto C XT1757 USB Drivers
How to Install Motorola Moto Z 2018 USB Drivers
- Download and extract the Motorola Drivers package on your computer.
- After extracting the driver package, you'll get the Motorola USB Drivers setup file.
- Run the Motorola USB Driver setup file on your computer.
- Motorola Mobile Drivers Installation window should open.
- Click on Next to continue.
- Now agree with the License Agreement by selecting "I Agree" and click on Next.
- Moto USB Drivers installation process should begin.
- Once the Motorola Phone Drivers installation is completed, click on Close to exit the setup.
- Now reboot your computer.
- Now you are ready to connect your Motorola Mobile Phone or Tablet to the computer through USB and use any Motorola software like Motorola Device Manager, RSD Lite Tool, etc.
How to Install Motorola Moto Z 2018 USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
- Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
- When the Device Manager window opens, click on your Computer name.
- Now click on Action and then click on Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now click on Show All Devices from the list and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Now select the Android ADB Interface driver from the list and click on Next.
- In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
Video Tutorial: How to Install Motorola Moto Z 2018 Android USB Drivers
How to Install Motorola Moto Z 2018 ADB and Fastboot Drivers
- Download and extract the 15 seconds ADB installer zip package on your computer.
- Now right click on the adb installer setup exe file and click on Run as administrator.
- Now a command prompt window should open.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
- Now, the ADB driver and Fastboot driver installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the "Device Driver Installation Wizard" window should open.
- Click on Next to install the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.
Video Tutorial: How to Install Motorola Moto Z 2018 ADB and Fastboot Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY