Computer not recognizing USB when Inoi 246Z is connected to PC using a USB cable? Inoi 246Z phone not showing up on PC? It might be a driver problem, or your computer might be missing the required Inoi 246Z USB Drivers. To fix the issue, download Inoi 246Z USB Driver and install them on your computer.
Most computers don’t have proper Google Android USB Drivers installed, so it is essential to download Inoi USB Drivers and install them on your computer to properly connect Inoi 246Z to a Computer or Laptop using a USB cable. Here on this page, we have shared the official Inoi 246Z USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8.
Apart from the official USB Driver for Inoi 246Z, we have also shared ADB interface drivers and Fastboot drivers for Inoi 246Z.
The Inoi 246Z Android USB Driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to a computer and laptop so that you can transfer images, videos, documents, and other files to and from phone to computer.
The Inoi 246Z ADB driver and Fastboot driver allows you to pass ADB commands and fastboot commands to perform specific operations on your phone right from your computer.
Download Inoi 246Z USB Driver
The Inoi Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It can also be used for general purposes like transferring data, media, documents, and other files from phone to computer and vice versa.
Inoi 246Z SPD Unisoc Driver for Flashing Firmware
How to install: Follow Tutorial
Inoi 246Z USB Driver for normal connecting to PC
How to install: Follow Tutorial
The Inoi 246Z Fastboot and ADB drivers can be downloaded below.
Inoi 246Z ADB and Fastboot Drivers
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Inoi 248M USB Drivers
How to Install Inoi 246Z SPD Unisoc Drivers
- Download the Spreadtrum SPD Unisoc Driver package and extract it on your computer.
- When extracted, open the Win7, Win8, or Win10 folder depending on your Windows OS version.
- Right-click on the DPInst64.exe (64-bit system) or DPInst32.exe (32-bit system) depending on your System Type and select Run as administrator. You can check the System Type by pressing Windows + Pause keys.
- The UNISOC Driver Installation Package wizard should open.
- Click on the Next button to proceed to install SPD Unisoc USB Drivers on your computer.
- Wait for the installation process to complete; when completed, click on the Finish button.
- Finally, reboot your computer.
How to Install Inoi 246Z USB Drivers Manually
- Download and extract the latest Android USB Driver (latest_usb_driver_windows.zip) file to Desktop on your computer.
- Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Now click on your Computer name in the Device Manager window.
- Now click on Action and then click on Add legacy hardware.
- Now Add Hardware Wizard window should open. Click on Next to continue.
- Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Select Show All Devices from the list and click on Next.
- In the next screen, click on Have Disk… to open the Install From Disk window.
- In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf driver file and click on Open and then on OK.
- Now select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
Video Tutorial: How to Install Inoi 246Z Android USB Drivers
How to Install Inoi 246Z ADB and Fastboot Drivers
- Download and extract the 15 Seconds ADB installer zip file on your computer. Once extracted, you'll find the ADB driver installer setup file.
- Right-click on the ADB installer setup file and select Run as administrator.
- Now 15 seconds ADB driver installer command prompt window should open on your computer.
- It should ask whether you want to install the ADB driver and Fastboot driver. Press the Y key and then press Enter.
- Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
- Now, the ADB and Fastboot driver installation process should begin.
- When the ADB driver installation is finished, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
- Now the "Device Driver Installation Wizard" window should pop-up.
- Click on Next to begin installing Google USB Drivers (WinUSB).
- Once the installation process is completed, click on Finish and restart your computer.
Video Tutorial: How to Install Inoi 246Z ADB and Fastboot Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
LEAVE A REPLY