iBall Andi 5 M8 USB Drivers (DOWNLOAD)

Windows computer not recognizing iBall Andi 5 M8 Phone? Or iBall Andi 5 M8 android phone won’t connect to the PC? It can be the result of missing iBall Andi 5 M8 USB drivers or bad or corrupted drivers. To fix iBall Andi 5 M8 Android phone not showing up on PC, download the iBall Andi 5 M8 USB driver and install it on your computer.

iBall USB drivers are essential to efficiently connect iBall Andi 5 M8 to Computer and Laptop using a USB cable. On this page, we have managed to share the official iBall Andi 5 M8 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8. Apart from the official USB Driver for iBall Andi 5 M8, we have also shared iBall Andi 5 M8 ADB interface drivers and Fastboot drivers.

The iBall Andi 5 M8 Android USB driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to the computer so that you can transfer images, videos, documents, and other files between the phone and computer. Thus it will fix the android file transfer not working issue.

The iBall Andi 5 M8 ADB driver and Fastboot driver allow you to pass ADB and Fastboot commands from the PC to perform certain operations on your phone.

Download iBall Andi 5 M8 USB Driver

The iBall mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes like transferring media and files to and from mobile to PC.

iBall Andi 5 M8 CDC Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

iBall Andi 5 M8 VCOM Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

iBall Andi 5 M8 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The iBall Andi 5 M8 Fastboot and ADB drivers can be downloaded below.

iBall Andi 5 M8 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: iBall Andi 5.5 N2 USB Drivers

How to Install iBall Andi 5 M8 CDC Drivers

Download the android-cdc-driver.zip file on your computer and extract it on Desktop.
Open the Device Manager on your computer by searching device manager from Windows Start Menu.
Now click on your Computer name in the Device Manager window.
Now click on Action and then select Add legacy hardware.
Add Hardware Wizard window should open, click on Next to continue.

Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Select Show All Devices from the list and click on Next.
On the next screen, click on Have Disk… to open the Install From Disk window.
Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select Android_Gadget_CDC_driver.inf file and click on Open and then on OK.

Select the Android Gadget VCOM Driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.
Once all the listed drivers are installed, restart your computer.

How to Install iBall Andi 5 M8 VCOM Drivers

Download and extract the android-vcom-driver.zip file on your computer.

Open Device Manager on your computer by right-clicking the Windows Start Button and selecting Device Manager.
Once the Device Manager loads, click on your Computer name.
Now click on Action and then on Add legacy hardware.
Now Add Hardware Wizard window should open. Click Next to continue.
Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.

In the next screen, select Show All Devices from the list and click on Next.
Now click on Have Disk… to launch Install From Disk window.
Click on Browse… and navigate to the folder where you have extracted the Android VCOM drivers in Step #1.
Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. Once selected, click on Open and then on OK.
Select MediaTek DA USB VCOM Port driver from the list and click on Next.

Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.
Once all the listed drivers are installed, reboot your computer.

How to Install iBall Andi 5 M8 USB Drivers Manually

Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.

When the Device Manager window opens, click on your Computer name.
Now click on Action and then click on Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.
Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now click on Show All Devices from the list and click on Next.

Now click on Have Disk… to open the Install From Disk window.
In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.
Now select the Android ADB Interface driver from the list and click on Next.
In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.

Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, reboot your computer.

Video Tutorial: How to Install iBall Andi 5 M8 Android USB Drivers

Subscribe to Android USB Drivers

How to Install iBall Andi 5 M8 ADB and Fastboot Drivers

Download and extract the 15 seconds ADB installer zip package on your computer.
Now right click on the adb installer setup exe file and click on Run as administrator.
Now a command prompt window should open.

It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
Now, the ADB driver and Fastboot driver installation process should begin.
When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
Now the "Device Driver Installation Wizard" window should open.