Hitech S300 USB Drivers (DOWNLOAD)

Hitech S300 phone not connecting to PC only charging? Or Hitech S300 phone not showing up on the computer? It may be caused by the missing Hitech S300 USB drivers or corrupted drivers. To fix the problem of the Hitech S300 phone won’t connect to a computer, download the Hitech S300 USB driver, and install it on your computer.

To properly connect Hitech S300 to a Computer or Laptop using a USB cable, Hitech USB drivers must be installed on your Windows computer. If you’re wondering where you can download the Hitech S300 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, or Windows 8, then we have got you covered. Here on this page, we have shared the official USB driver for Hitech S300 and the ADB interface drivers, and Fastboot drivers.

Once the Hitech S300 Android USB Driver is installed, you’ll be able to connect Hitech S300 to a computer as an MTP USB device (MTP Transfer Protocol). When connected as an MTP device, you can transfer images, videos, documents, and other files to and from your phone to your computer.

If you have installed the Hitech S300 ADB driver and Fastboot driver on your computer, then you can pass ADB commands and Fastboot commands to perform certain operations on your phone from your computer.

Download Hitech S300 USB Driver

The Hitech Mobile Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlocking bootloader, etc. It can also be used for general purposes like transferring media, documents, and other files from phone to computer and vice versa.

Hitech S300 Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

Hitech S300 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The Hitech S300 Fastboot and ADB drivers can be downloaded below.

Hitech S300 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Hitech S5 4G USB Drivers

How to Install Hitech S300 USB Drivers Manually

Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
When the Device Manager window opens, click on your Computer name.
Now click on Action and then click on Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.

Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now click on Show All Devices from the list and click on Next.
Now click on Have Disk… to open the Install From Disk window.
In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.

Now select the Android ADB Interface driver from the list and click on Next.
In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, reboot your computer.

Video Tutorial: How to Install Hitech S300 Android USB Drivers

Subscribe to Android USB Drivers

How to Install Hitech S300 ADB and Fastboot Drivers

Download and extract the 15 seconds ADB installer zip package on your computer.

Now right click on the adb installer setup exe file and click on Run as administrator.
Now a command prompt window should open.
It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
Now, the ADB driver and Fastboot driver installation process should begin.

When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
Now the "Device Driver Installation Wizard" window should open.
Click on Next to install the Google USB Drivers (WinUSB).
Once installed, click on Finish and restart your computer.